CMF / Maxillofacial Instruments
71 CMF / Maxillofacial Instruments products — diagnostics, patient-care equipment, instruments and accessories.
Craniomaxillofacial Instruments for Facial Trauma and Reconstruction
Craniomaxillofacial (CMF) instruments address fractures, deformity and reconstruction of the cranium, midface, orbit and mandible. They support fixation of delicate facial buttresses, osteotomy for orthognathic correction and management of trauma, tumour resection defects and congenital anomalies where precise, low-profile hardware is essential.
This range spans miniplates and microplates, self-drilling and emergency screws, plate benders, cutting and drilling instruments and dedicated screwdrivers. Titanium implants offer biocompatibility and low imaging artefact, while fine-gauge instrumentation and colour-coded systems aid accurate adaptation across the thin, contoured bone of the facial skeleton.
Showing 1–24 of 71
1.5/2.0mm Plate Instrument Set
Complete instrument tray for 1.5 mm and 2.0 mm maxillofacial plating — hollow reamers, screwdrivers, depth gauge, limited drill bits and AO handle.
1.5MM 110° L-plate Maxillofacial Plate
1.5 mm 110° L-plate for maxillofacial osteotomy fixation — 0.6 mm titanium, left/right 4- and 5-hole options, etched bar for fast contouring.
1.5MM 110° L-type Locking Plate Maxillofacial Plate
1.5 mm 110° L-type locking plate for maxillofacial fixation — 0.6 mm titanium, angular-stable locking screws, 4- and 5-hole lengths.
1.5MM 90° L-plate Maxillofacial Plate
1.5 mm 90° L-plate for maxillofacial osteotomy fixation — 0.6 mm titanium, left and right 4-hole options with an etched, easily bent bar.
1.5MM 90° L-type Locking Plate Maxillofacial Plate
1.5 mm 90° L-type locking plate for maxillofacial fixation — 0.6 mm titanium, 4-hole angular-stable construct for orthognathic osteotomy.
1.5MM Anatomical L-plate 6 holes Maxillofacial Plate
1.5 mm anatomical 6-hole L-plate, pre-contoured for maxillofacial fixation — 0.6 mm titanium in small, medium and large left/right sizes.
1.5MM Arc Locking Plate Maxillofacial Plate
1.5 mm arc locking plate for maxillofacial fixation — curved 0.6 mm titanium profile, angular-stable locking screws, 6/10/14-hole lengths.
1.5MM Arc Plate Maxillofacial Plate
1.5 mm curved arc maxillofacial plate — 0.6 mm titanium with an etched, easily contoured bar for orthognathic osteotomy and facial-fracture fixation.
1.5MM Double Y-plate Maxillofacial Plate
1.5 mm double-Y maxillofacial plate — 0.6 mm titanium, 6-hole geometry for multi-directional fixation in orthognathic and facial-fracture work.
1.5MM Double Y-type Locking Plate Maxillofacial Plate
1.5 mm double-Y locking maxillofacial plate — 0.6 mm titanium, 6-hole angular-stable construct for multi-directional orthognathic fixation.
1.5MM L-plate 4 holes Maxillofacial Plate
1.5 mm 4-hole L-plate for maxillofacial fixation — 0.6 mm titanium in small, medium and large left/right sizes with an etched, easily bent bar.
1.5MM L-plate 6 holes Maxillofacial Plate
1.5 mm 6-hole L-plate for maxillofacial fixation — 0.6 mm titanium in small, medium and large left/right sizes for longer-span osteotomy fixation.
1.5MM Orbital Floor Plate Maxillofacial Plate
1.5 mm orbital floor plate — an ultra-thin 0.4 mm titanium plate to reconstruct the orbital floor after blow-out fracture, in two sizes, left/right.
1.5MM Orbital Plate,Type-I Maxillofacial Plate
1.5 mm Orbital Plate Type-I — a pre-shaped 0.6 mm titanium plate for orbital-rim and wall reconstruction after facial trauma.
1.5MM Orbital Plate,Type-II maxillofacial plate
1.5 mm Orbital Plate Type-II — a pre-shaped 0.6 mm titanium plate for orbital-rim and wall reconstruction after facial trauma.
1.5MM Orbital Plate,Type-III Maxillofacial Plate
1.5 mm Orbital Plate Type-III — a pre-shaped 0.6 mm titanium plate for orbital-rim and wall reconstruction after facial trauma.
1.5MM Orbital Plate,Type-IV Maxillofacial Plate
1.5 mm Orbital Plate Type-IV — a pre-shaped 0.6 mm titanium plate for orbital-rim and wall reconstruction after facial trauma.
1.5MM Orbital Plate,Type-V Maxillofacial Plate
1.5 mm Orbital Plate Type-V — a pre-shaped 0.6 mm titanium plate for orbital-rim and wall reconstruction after facial trauma.
1.5MM Rectangular Locking Plate Maxillofacial Plate
1.5 mm rectangular (box) locking maxillofacial plate — 0.6 mm titanium, 4-hole 14 × 14 mm angular-stable construct for four-point fixation.
1.5MM Rectangular Plate Maxillofacial Plate
1.5 mm rectangular (box) maxillofacial plate — 0.6 mm titanium, 4-hole 14 × 14 mm geometry for stable four-point fixation across an osteotomy.
1.5MM Self-tapping Screw Maxillofacial Plate
1.5 mm self-tapping maxillofacial screw — fixes 1.5 mm CMF plate systems to facial bone, supplied in 4–13 mm titanium lengths.
1.5MM Straight Bridge Locking Plate Maxillofacial Plate
1.5 mm straight bridge locking plate — 0.6 mm titanium, a 4-hole 20 mm angular-stable plate that bridges a maxillofacial osteotomy gap.
1.5MM Straight Bridge Plate Maxillofacial Plate
1.5 mm straight bridge maxillofacial plate — 0.6 mm titanium, a 4-hole 20 mm plate that spans and stabilises an osteotomy gap.
1.5MM Straight Locking Plate Maxillofacial Plate
1.5 mm straight locking maxillofacial plate — 0.6 mm titanium, angular-stable, in 6/10/14-hole lengths for linear osteotomy and fracture fixation.
Related topics
Configuration assistance
Can't find what you're looking for?
A sales engineer scopes quantities, sizing, instruments and compliance paperwork with you and replies within one business day. No commitment, no hard-sell — just a quote you can hand to procurement.